Slipper cleaning and disinfection operation procedures
1.Facilities: Set up two decontamination tanks or decontamination buckets, equipped with rubber gloves, disinfectant drugs, water sources, measuring cups, etc.
2.Cleaning: Wash the slippers with water or detergent first.
3.Flush: Rinse the slippers with water in a clear water tank or a water bucket.
4.Disinfection:
（1）Amount of cup to remove the venom into the sterilized bucket with the cover and the outer wall marked with scale. Soak the slippers completely in the disinfection tank or disinfection tank. The disinfectant concentration and soaking time should be strictly operated according to the instructions. When using a chlorine-containing disinfectant, the effective chlorine content of the soaking solution should be 250-500 mg/L, and the soaking time should be no less than 30 minutes.
（2）Heat-resistant slippers can be operated by circulating steam at 100 ° C for 20 minutes to 30 minutes, or by boiling sterilization for 15 minutes to 30 minutes.
5.Cleaning: Remove the slippers from the disinfectant, rinse with clean water, remove the residual disinfectant, let cool for 10 to 15 minutes, and place the cleaning cabinet or safe deposit box after the slippers are dry.
Shower curtain cleaning
1.Cotton shower curtain
The cotton shower curtain is washed like a garment, poured into a laundry detergent, or directly machine washed. Wrinkle after drying can be ironed and used.
2.Canvas and woven cloth
Soap water, preferably warm water, can be washed for half an hour. It is easier to wash the stains.
3.Plastic shower curtain
Plastic material can be wiped directly with soapy water or warm water. Soft soap and shower gel on the shower curtain can also be softened with vinegar. Wash back and forth with a brush.
4.Blind curtain
Many of the hotel shower curtains are shutters. Bleach can be used for cleaning and disinfection. Rinse the stain with warm water.
Shower curtain mold prevention knowledge
1.The bathroom has more water vapor, and the indoor closed shower curtain is easy to accumulate mold due to moisture. It is recommended to open the exhaust fan after bathing in the bathroom. Ensure the ventilation of the bathroom.
2.A dehumidifier or desiccant can be used in the bathroom. Avoid and reduce the mildew of the shower curtain.
3.After the shower curtain is cleared, it is exposed to the sun to eliminate bacteria and moldy mold on the shower curtain.
4.Keep the room ventilated and give the bathroom a clean environment.
